This simplified smart percussive therapy device prioritizes the essential features you need while maintaining the power and effectiveness of Theragun's deep muscle treatment.

Ease discomfort, soothe tightness and tension, and recover faster in seconds.

The Theragun Prime Hand-held Percussive Therapy Massager is driven by a proprietary brushless motor with QuietForce technology, enabling it to output impressive percussion power without producing much noise.

Built to adapt to you and your habits, Theragun Prime connects via Bluetooth technology to provide customised routines derived straight from your activity data. The companion app will guide you through each routine, showing you different ways to help enhance your wellness and lifestyle.

Theragun Prime features a 16mm amplitude that helps stimulate circulation, release tension, and generate heat. Highly efficient, the 16mm amplitude reaches up to 60% deeper compared to standard, consumer-grade vibration massagers.

For a comprehensive massage session, Theragun Prime comes with 4 foam attachments. Use the dampener for targeting bony or tender areas; standard ball for large and small muscle groups; cone for pinpoint muscle treatment; or the thumb for trigger points and the lower back.

Use the Theragun Prime together with the Therabody app (download required) for guided and personalised wellness routines based on gathered data, including your real-time activity and behaviors. It also seamlessly integrates with Apple Health, Google Fit, and Samsung Health to further optimise its suggestions.

Directions:

Using the Prime

1. To turn on the Prime, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the up (^) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level.
3. The Prime should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
4. To turn off the Prime, firmly press and hold the center button on the button pad.

Connecting the Attachments

Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment.

Charging the Prime

1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime.
2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Theragun Prime is not wireless charging enabled.

;

Using the Prime

1. To turn on the Prime, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the up (^) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level.
3. The Prime should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
4. To turn off the Prime, firmly press and hold the center button on the button pad.

Connecting the Attachments

Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment.

Charging the Prime

1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime.
2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Theragun Prime is not wireless charging enabled.

;

Using the Prime

1. To turn on the Prime, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the up (^) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level.
3. The Prime should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
4. To turn off the Prime, firmly press and hold the center button on the button pad.

Connecting the Attachments

Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment.

Charging the Prime

1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime.
2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Theragun Prime is not wireless charging enabled.

;

Using the Prime

1. To turn on the Prime, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the up (^) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level.
3. The Prime should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
4. To turn off the Prime, firmly press and hold the center button on the button pad.

Connecting the Attachments

Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment.

Charging the Prime

1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime.
2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Theragun Prime is not wireless charging enabled.

;

Using the Prime

1. To turn on the Prime, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the up (^) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level.
3. The Prime should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
4. To turn off the Prime, firmly press and hold the center button on the button pad.

Connecting the Attachments

Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment.

Charging the Prime

1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime.
2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Theragun Prime is not wireless charging enabled.

;

Using the Prime

1. To turn on the Prime, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the up (^) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level.
3. The Prime should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
4. To turn off the Prime, firmly press and hold the center button on the button pad.

Connecting the Attachments

Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment.

Charging the Prime

1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime.
2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Theragun Prime is not wireless charging enabled.

;

Using the Prime

1. To turn on the Prime, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the up (^) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level.
3. The Prime should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
4. To turn off the Prime, firmly press and hold the center button on the button pad.

Connecting the Attachments

Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment.

Charging the Prime

1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime.
2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Theragun Prime is not wireless charging enabled.

;

Using the Prime

1. To turn on the Prime, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the up (^) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level.
3. The Prime should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
4. To turn off the Prime, firmly press and hold the center button on the button pad.

Connecting the Attachments

Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment.

Charging the Prime

1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime.
2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.

Theragun Prime is not wireless charging enabled.

Warnings:

Box Contains:

1x Theragun Prime 1x Protective Carrying Pouch 4x Attachments (Dampener, Standard Ball, Thumb & Cone) 1x Power Adapter